Google AdSense Ad (Banner)

An Illinois Buyer Sends Hubs in Two Conditions. Keep the Broaching RFQ Clear.

An Illinois gear-shop buyer sends one request for hubs, then learns that some will arrive as rough blanks while the others already have finished bores and faces. A single per-piece broaching quote can hide a consequential difference: who must bring each blank to the condition needed for a controlled internal keyway or spline cut?

An Illinois broaching RFQ blank condition checklist should separate rough and finish-machined hubs into distinct scope lines. Give each line its own controlled drawing, blank condition, quantity, proposed starting-bore evidence, required feature and acceptance owner. The supplier can then quote the actual work instead of assuming that all incoming hubs are ready for the same setup.

Start with two input states, not one finished feature

A rough hub may have a bore that still needs machining or verification before broaching. A finish-machined hub may already have a qualified bore and critical faces that must be protected during an additional operation. The final internal profile could be identical, but the preparation, workholding, handling and inspection responsibilities need not be.

State whether the parts are supplied as castings, forgings, pre-machined blanks or fully finish-bored components, and identify the material grade and known hardness condition. Avoid describing a blank only as 'steel hub' or 'ready to broach.' Those words do not define the actual incoming geometry.

Broaching Technologies, LLC identifies its shop in Menomonee Falls, Wisconsin, and describes contract broaching of keyways, splines and other internal forms. An Illinois buyer can approach a Wisconsin supplier for a quotation, but should confirm which transport, incoming inspection and material preparation activities are included. Do not confuse the buyer’s location with the supplier’s shop location.

Specify who owns the starting bore

For the rough condition, identify the intended bore preparation process and the party responsible for it. If the buyer will supply rough hubs, the supplier should state whether it can assess and quote any preparatory machining or whether the buyer must deliver the parts after a separate operation. Do not assume that a broaching-services listing includes machining the bore to size.

For the finished condition, require an agreed starting-bore report or another specified conformance record. Explain whether the relevant datum faces, concentricity relationship or surface condition have already been accepted by the buyer. A successful broached feature does not automatically validate every upstream dimension of the hub.

Ask both sides to agree what happens when an arriving blank differs from the stated input condition. The shop should identify the observation and segregate the affected items; the buyer’s engineering or quality representative should decide whether a preparation change, a replacement blank or a revised quote is appropriate. An operator should not silently adjust another company’s finished bore.

Send separate drawing and quantity lines

The sample below is entirely fictional. Drawing identifiers, revisions and quantities are invented to demonstrate how an RFQ can distinguish two incoming conditions, not to describe any customer order or Broaching Technologies commitment. All actual dimensional requirements would come from the buyer’s controlled prints.

 




































Illustrative RFQ line



Rough-state hubs



Finished-bore hubs



Drawing / revision



R-21, Rev A (rough input)



F-09, Rev C (finished input)



Fictional quantity



24 hubs



36 hubs



Incoming bore



Preparation/status to confirm



Final bore; report supplied



Dimensional owner



Buyer sets stock; prep party agreed



Buyer controls accepted bore



Broached acceptance



Specified feature per job drawing



Same feature; protect finished faces



The two drawing references should show how the incoming condition is defined and how the final broached profile is accepted. If the buyer uses one drawing with two process states, attach a controlled condition schedule instead of fabricating another print. The point is to preserve unambiguous source records, not to prescribe a particular drawing-numbering convention.

ASME’s description of Y14.100 identifies engineering drawing practices for the preparation and revision of drawings and associated lists. That supports treating the drawing package as a controlled engineering input, but the part-specific dimensions and contractual acceptance rules must come from the actual customer documents.

Quote the operations that differ

The RFQ for each line should identify any pre-broach machining or inspection, the specified internal cut, handling of already finished faces, tooling and setup assumptions, first-article or sample inspection requirements, and return packaging. Ask for a note when an operation is excluded or subject to an incoming inspection result. Without those fields, two different quotations may appear comparable but price different baskets of work.

If the supplier is quoting only the broaching pass, write that boundary plainly. If the quote includes preparation, request a separately described scope so the buyer can compare it with its own upstream process. Do not insert guessed tooling charges, lead times or inspection percentages in the brief.

Where quantities differ, keep each unit count with its matching input state and drawing. A supplier may need to consider different workholding, setup or tool access. Ask whether a single tool can address both conditions under the approved drawing or whether a separate review is needed. The answer belongs in an application review, not in a general brochure.

Use the regional page as a sourcing lead, not proof of proximity

For an Illinois OEM considering outsourced broaching for Illinois gear shops, a regional search result is only a first contact point. The buyer should confirm that the Menomonee Falls shop will review the requested feature, that shipping arrangements make sense for both blank conditions and that the actual production date is available. A page aimed at Illinois purchasers does not make the shop an Illinois facility.

Send pickup and return addresses, packaging needs, lot separation instructions and who handles any customs or carrier documentation that applies. For a domestic Illinois-to-Wisconsin job, avoid inventing a cross-border requirement. Instead, ask which party books and pays for transportation and who documents receipt of the two identified lots.

Keep the receiving report tied to the correct condition

On delivery, record quantity, drawing identifier, blank condition, visible damage and available bore or surface measurements for each container. Do not merge the rough and finished populations in one anonymous bin. A nonconformance found on a finished bore needs a different upstream investigation from an expected rough-state allowance.

Define whether the subcontractor’s inspection accepts only its newly broached feature or also verifies characteristics supplied by the customer. Use the purchase order to identify the acceptance owner and preserve any pre-existing features marked 'customer supplied, not inspected' where that is accurate. A final pass/fail stamp without scope does not explain what was measured.

Close the quote with two clear release decisions

Before issuing the order, ask the buyer’s manufacturing engineer to confirm the starting condition on each line, and ask supplier engineering to confirm tooling access, proposed operation and evidence. Purchasing then aligns the agreed line items with quantity and shipment schedule. A change in bore condition after award should reopen only the affected scope rather than automatically rewriting both lines.

The strongest quote is not necessarily the shortest. It shows where the rough hub stops being the buyer’s responsibility, what is protected on the finished hub and which records prove the broached result. Two controlled input lines make an out-of-state machining request easier to price, perform and inspect without treating different blanks as interchangeable.

 


Google AdSense Ad (Box)

Comments